Appendix 1B. REQUIREMENTS FOR COMMERCIAL/INDUSTRIAL SITE PLANS

CITY OF BESSEMER

MINIMUM PLAN REQUIREMENTS FOR COMMERCIAL/INDUSTRIAL SITE PLANS

E.E.F.S. JOB NO.: DATE:

REVIEW NO.:

TITLE SHEET

____________ Project name and street address

____________ Owner/developer name, address, phone number (including cell and fax)

____________ Vicinity map with location to ¼, ¼, section, township, range

____________ Engineer's name, address, phone number (including cell and fax)

____________ Plans on 24 × 36 sheets only

BOUNDARY SURVEY/EXISTING CONDITIONS

____________ Topographic tie to USGS Datum — note tie location

____________ Existing public roads with right-of-way width and paving width

____________ Utilities — water, sewer, electric power, phone, natural gas, other

____________ Easements

____________ Zoning classification and zoning of all adjacent property

____________ Fire hydrant nearest to proposed development with color of top noted on drawing

____________ Drainage structures (size and type)

____________ Property boundary with marker and boundary tie

____________ Legal description and deed reference

____________ Parcel identification number

PROPOSED SITE PLAN

____________ Proposed use

____________ Property boundary

____________ Building location (existing and proposed)

____________ Setback requirements

____________ All adjacent buildings within 50 feet of boundary and use

____________ Street names, alleys and private roads

____________ Easements

____________ Sight distance to public access

____________ Detailed parking lot plan

____________ Parking lot calculations on required spaces

____________ Driveways with width and radius

____________ Loading zones

____________ Buffer zones

____________ Variances (supply copy if previously approved)

GRADING AND DRAINAGE PLAN

____________ Topography tied to USGS

____________ Existing and proposed contours

____________ Existing and proposed drainage structures - pipes (headwater - hydraulic grade lines — Q(CFS) — V(FPS))

____________ Design data used (25 year)

____________ Headwater on all entry pipes

____________ Inlet D.A., CFS

____________ Drainage profiles as necessary

____________ Floodprone areas (firm number and panel)

____________ Drainage channels - channel lining type — flow level velocity

____________ Drainage report

____________ Non-adverse effects letters

____________ All sheets stamped with signature from authority of record

EROSION CONTROL PLAN — AS SUBMITTED TO ADEM AND SWM

____________ Design to comply with Alabama Handbook of Erosion Control

____________ Copy of ADEM permit

____________ Copy of Jefferson County Stormwater Permit

SANITARY SEWER OR ON-SITE SEWER DISPOSAL SYSTEM

____________ Approved plans from Jefferson County Environmental Services or Jefferson County Health Department

____________ Sanitary sewer impact number

ACCESS PERMIT TO STATE OR COUNTY ROADS

All plans (6 sets) must be prepared by a registered engineer, architect or appropriate professional in accordance with state law.

The engineer must check and sign this form before plans will be accepted for review.

I certify that the preceding information is complete and true to the best of my knowledge.

____________ ____________ / ____________ / ____________  Engineer

____________ / ____________ / ____________ ____________  Date

 

The above information is complete enough to begin the plans review process.

____________ ____________ / ____________ / ____________  City Engineering Office

____________ / ____________ / ____________ ____________  Date